Prototyping
Design Specifications & Prototyping
Design Specification: requirements to be satisfies by a material, design, product or service.
Type of specifications relevant to product design:
1. Material Specification
2. Functional/ Performance Specifications
3. Standard Specification
4. Test Standard
However, at the preliminary design stage, we will only be focusing on Material & Functional/Performance Specifications.
Link to our design specification table.
Prototyping : a simple experimental model of the proposed product to check how well it matches what users want through the feedback to guide development.
Purpose of prototyping:
- get insights into less-obvious areas of the users' world
- provide sense of ownership to all concerned stakeholders
-show the design to the users to gather feedback to help pinpoint which elements work best
CAD Sketch:
Source: https://grabcad.com/library/headphone-97 (we couldnt sketch it out ourselves as it our brains werent big enough 🧠😴)
Prototyping process:
we found a foam sheet and decided to use it as the material for our ear cushion
here's how it looks like after we cut it out
We sliced it in half and wrapped it with cloth. My teammate Jun Hao actually sewed the cloth to the foam so that it is secured, but it cannot be seen in the picture 👀.
This is how the back part of the headphone look like.
Jun Hao made this mechanism which will be attached to the front part of the headphones.
the part of the headphones which will be attached to the previous mechanism. the cushion will rest on top of this layer.
Video of how it works:
when the mechanism is pulled backwards, it secures the ear cushion; when it is pushed forward, the ear cushions can be removed and replaced with new ones.
my teammate Kieron made the headband using the Shaft mechanism so that the length can be adjusted to the users' likings. He then joined the headband and ear cushion together using tape.
Video of our final product, credits to Kieron 😳:
~~~~~~
This concludes my ICPD journey. It was a blast experiencing so many things for the first time. From doing manual sketches to doing sketches using Fusion360 and to prototyping using cardboard and 3D printing. Although there were plenty of confusion and frustration along the way, I learnt a lot and I am thankful for this learning opportunity. oh yes, and my teammates HAHAHHAHAH 😌🦁 it was a lot of fun working with them.


.jpeg)




.jpeg)
Comments
Post a Comment