Cardboard Joinery
PRACTICAL 2: Cardboard Joinery
For this practical session, we agreed on building a water well after looking through several ideas on Google. This idea was inspired by the water filter challenge we did back in Year 1.
We did modify our design quite a bit so that we can make use of at least 6 cardboard joinery methods an reduce the usage of glue-guns.
List of the cardboard joinery methods we used:
1. Flanges- pillars
2. Slot + Tab
3. Score bend- pillars
4. Smooth bend- bucket
5. Skewers- handles
6. Holes and fasteners
our reference picture
our final product (would've add roofs to the flanges if we had more time)

Sketches of our measurements for the different components for better visualization.
The parts of this water well:
- 2 pillars for support
- the well itself
- the bucket
- wheels that is used as a handle
For the pillars, we decide to use flanges to make them
- We transferred the measurements on the cardboard and started cutting out the parts.
2. We scored the cardboard parallel to the flutes to make it more flexible to be bent into a cylinder shape. (We also made sure that we DID NOT cut through the bottom part as well
me holding the flange I cut out 👀
we secured both sides using 'slot and tab'
(for our final product, we rounded the flanges inwards so the uncut side faces outwards so it looks less creepy, but we forgot to take pic 😬)
For the well, we used a square with a hole in the center to represent it.
Dimensions for well: 15x15cm outer border with 7x7cm hole
For the bucket,
1. we cut out a rectangle and joined the ends together,
2. glued it to the base,
3. punch hole on the walls so that the chopsticks can pass through (we trimmed off the excess part that was sticking out of the bucket)
4. lastly, we tied a knot using the rope so that the bucket can hang over the water well.
For the wheel,
1. we cut out 2 circles which are 4cm in diameter and used glue gun to stick them together
2. we inserted 2 skewers as handles and trimmed off the sharp edges.
Assembling the parts;
1. we connected 2 chopsticks using glue-gun,
2. wrapped the rope that was used previously when making the bucket, using fasteners
3. punched holes on the flanges so the chopstick can pass through and the bucket can hang over the well
punching holes on flanges☝
4. we cut out 2 circles that are 1.5cm in diameter to act as stoppers so the rope will not be out of position after rotating the wheel
5. for the base of the well, we cut out a big square that measures 42x42cm
6. we used 'slot and tab' to secure the flanges onto the base without using glue gun
.jpg)
7. hang the bucket over the well
this was how our water well turned out after decorating & putting everything together:
Trying out our water well:
(please imagine that there's water in the well thanks)
Group pic with the final product ☝
Learning reflection:
I learnt that cardboard is one of most common material used for prototyping as it is cheap. It can be used to create different types of shapes. Cardboard joinery methods can be used to join parts of the cardboard together without the use of glue.
Dr Noel showed us a Pegasus that was created by cardboard professionals using only cardboard with no glue guns. I was amazed at how clean the cuts were and the 'slot and tab' method was done so neatly. While we were trying to secure our flanges onto the base, we did not know that the shape of the tabs can affect how effective this joinery method can be. We just cut a rectangular tabs and forced them into the slot. This caused out tabs to be wrinkled and they were not as tight as it could be.
However, after examining the products that were done by the cardboard professionals, I learnt that the tabs should be shaped more like a hexagon and the slot should be less rectangular for it to be more secure.
I think that this practical session went quite smoothly as we managed to complete our product within the time limit. Although some parts of it did not go according to plan, like how we had to modify our initial design on the spot so we can fit in more cardboard joinery methods to refrain from using the glue gun, and Jasmine broke a pair of scissors while trying to trim off the excess part of the chopsticks, we had a lot of fun and we are proud of what we created.
This practical session was one of the best I have had in school and it definitely opened my eyes on how versatile cardboards can be.
rest in peace scissors, u did well :)

.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)

.jpg)
.jpg)


.jpg)
Comments
Post a Comment