Material Selection
WEEK 11: Materials for Design
In this lesson, we learnt how to select the correct material our product. Choosing the right material can be beneficial as it can lead to lower product costs, better performance, reduce environmental impact and allow the product to be safer for usage. (all the good stuff amirite?? ๐ฝ๐ป)
The most important factor to take into consideration when choosing materials is the characteristics of the materials.
Material properties can be classified into many different categories, for example:
- Mechanical properties ๐ช- strength, ductility, Young's modulus
- Thermal properties ๐ก- thermal conductivity, specific heat capacity
- Fabrication properties ๐- ease of machining/ welding
There are 3 stages to select an appropriate material for your product:
- Define material requirements for the design (IDENTIFY the *function* of the product, then relate it to the material requirements) ๐ฏ
- Select & evaluate candidate materials (via the use of COWS ๐ฎ)
- Choose the most economical material ๐ค
WEEK 12: Design for Materials
Finding a material that suits the product requirement perfectly can be very difficult and costly, hence there are occasions where we ought to make changes to the product design so that a particular material can be used. For example, a hair dryer ๐จ that everyone is familiar with nowadays. Did you know that the hair dryers have at least 100 years of history? I bet you didn't!๐..But yes, the first hair dryer was created in the year 1890.
Since the first design was too bulky and some clients hair take too long to dry up, modifications were made to the design in hopes to improve the product effectiveness.
Fast forward a few years, the first portable hair dryer was finally invented and it was made out of only plastic and wood. (modifications were made to the design so that safer materials like plastic and wood can be used)
Sustainable design is the approach to create products & services that are environmentally friendly ๐. We can make use of some sustainable design strategies, for example:
- using recycled materials
- use energy efficient processes
-design for reuse & recycling (easy to disassemble)
In my opinion, I think that it is crucial❗ to take this design factor into consideration when coming up with product designs given today's context where global warming ๐ทand sustainability is a huge topic that is being discussed a lot.
Click here๐to look๐ at our report.
Practical 3: Properties of Material
For this practical, we were tasked to investigate a few different material properties, namely:
- Thermal conductivity ๐ก
- Surface tension ๐ข
- Young's Modulus ๐
- Viscosity of liquid ๐ฆ
My group carried out Experiment 3B, to determine the surface tension of water & water with 1 drop of detergent added.
Surface tension is defined as the property of the surface of a liquid that allows it to resist an external force due to the cohesive nature of the water molecules. It is also classified as a physical property (๐ญrecall week 11 topic), in terms of material properties.
Surface tension can be measured using various methods. Foer example, using Wilhelmy Plate, Pendant Drop and Du Nouy Ring. But for this practical session, we used the Du Nouy Ring ๐method.
Objective of experiment: to measure the mass required to tear the meniscus of different test liquids and to determine the surface tension of the liquid.
Experiment procedures:
1. Place the retort stand with a lever and a beaker on a flat surface
Reflection ๐:
During this practical session, I have came to realize the importance of surface tension in our daily lives. For example, it is used during detergent formulation where researchers make use of surface tension to find ways to improve cleaning properties of products. It is also used by paint companies to improve effectiveness of paints so that the paint products can be better tailored to different customers' demands.
As for the experiment, I feel that we carried out the whole experiment quite smoothly. However, the lever balance we used was a limitation as it was hard to tell if the lever is parallel to the table top before adding the loads onto the weighing boat. This may lead to inaccuracy in results as there would be unequal moment about the pivot due to uneven balance.














Comments
Post a Comment